Cognito Front Sway Bar End Link Kit For 4-6 Inch Lifts On 01-19 2500/3500 2WD/4WD – 110-90253

These end links are also a little longer than recommended lengths to allow clearance for our Larger Diameter tie-rod upgrade. Used as a Heavy-Duty replacement of the OE style end links which are notorious for breaking.

Our Sway bar link kits utilize a lower clevis system which takes some of the angle off the link when the suspension is cycling. Minimizing stress that can cause breakage.

While we often upgrade other manufacturers kits with these links. We recommend you check your current length and match it up to the specs to help order the correct size if you do not have a Cognito Motorsports lift. Sold in pairs. Made in the USA.

Notes:

• Mounting surface to mounting surface measurement for this kit is 11 Inches (Measured from top of lower control arm up to the bottom of sway bar).

Details:

• Front Sway Bar End Link Kit for 4-6 Inch lifts on 01-19 2500/3500 2WD/4WD
• Lower clevis system which takes some of the angle off of the link when the suspension is cycling minimizing stress that can cause breakage
• Polyurethane bushings
• Made in the USA
• Lift Height: 4-6 Inches